Wear protection for powertools
Powertools are tools such as drills, grinders, jigsaws, circular saws and chain saws for concrete, wood and steel that are used in the professional sector. BorTec provides efficient wear protection optimization for power tools with boriding and nitriding.
Borocoat® and Nitriding protect against:
Abrasive wear and surface disruption
Our solutions in use
The extremely hard iron boride coatings protect the surface of tool holders against wear caused by surface disruption.
Our boriding process protects rock chain saw chain links from abrasive wear caused by rock dust.
Nitriding protects chain pins from friction wear.
Borocoat® & Nitriding – Materials
Materials suitable for nitriding and boriding treatment.
- Unalloyed steel
- CARBON STEEL
- Quenched and tempered steel
- Case hardening steel
- Tool steel
- Cast steel
Information about the process
Tips for successful heat treatment
Information about the process
Tips for successful heat treatment – coming soon
Our service for you
Wear protection by boronizing for power tools
Power tools are tools such as drills, grinders, jigsaws, circular saws and chainsaws for concrete, wood and steel that are used in the professional sector. The daily intensive use thus distinguishes them decisively from the normal do-it-yourself sector. From a design and user perspective, susceptibility to wear processes is a common problem with tools. BorTec provides an effective method for optimizing wear protection on power tools with boronizing.
Applications of boronizing and nitriding for powertools
Due to their mode of operation, drilling and chisel tools are exposed to strong vibrations, while hammer mills and tool holders are subject to surface disintegration and abrasive wear caused, for example, by rock dust. Case-hardened steels in combination with a boronized surface offer excellent protection against surface disruption, adhesion and abrasion while maintaining very good toughness of the base material. In the case of saws for wood and rock, in addition to very good cutting durability, the most important factor is low elongation of the chains during operation. Chain links and pins are subject to high abrasive wear under frictional stress. Nitriding and boriding these components ensures low-wear operation for a long time and a longer service life of borided chains compared to conventional solutions.
Which materials can be treated?
All steel grades used at Power tools can be hardened by boronizing or nitriding. Case-hardening steels and quenched and tempered steels are most frequently used. The BOROCOAT® process from BorTec is particularly suitable for these two steel groups. The combination of case hardening or quenched and tempered steel with a BOROCOAT® diffusion coating ensures unrivaled wear protection of the borided surface with perfect support and toughness of the base material.
For nitriding steels, the nitriding treatment as offered by BorTec is particularly suitable.
BORTEC’S SERVICES FOR POWER TOOL MANUFACTURERS
BorTec offers complete heat treatment in the Powertools area. Complex process combinations such as case hardening, nitriding, boriding, diffusion annealing, vacuum hardening and tempering are handled “from a single source” in short lead times.