BOROCOAT® Premium Tubing and Pup Joints
for Harsh Oil & Gas Environments
Protect your production string from the inside out!
Boronized Premium Tubing and Pup Joints. Internally borided for superior abrasion and corrosion resistance.
BOROCOAT® Premium Tubing by Bortec USA is a high-performance solution for oil & gas operators facing internal wear, erosion, and acidic corrosion. Through advanced boronizing, we create an ultra-hard internal surface layer to boronized premium tubing and boronized pup joints, dramatically improving durability and uptime in the most aggressive well conditions. To the highest standards proudly manufactured in Tennessee, USA.
Properties of BOROCOAT® Premium Tubing and Pup Joints
Outstanding Abrasion Resistance
BOROCOAT® Premium internally boronized tubing provides superior protection against internal erosion from sand, solids, and turbulent flow. ASTM G65 testing (6000 revolutions) shows up to 80% less material loss compared to conventional steel grades like mild steel or J55.
Chemical Resistance to Acids and CO₂
BOROCOAT® Premium Tubing resists internal corrosion caused by hydrochloric acid (HCl), CO₂, and other acidic media. This makes it ideal for use in acid-stimulated, sour, or CO₂-injection wells.
Thick Boronized Layer for Extended Performance
Each component is treated with a 150–250 µm (0.006–0.010 inch) boride layer on the internal surface, delivering extreme hardness and long-term resistance to wear—while preserving the core strength of the tubing.
Reliable Pup Joints for High-Wear Zones
BOROCOAT® boronized pup joints provide targeted protection in sections of the string exposed to concentrated abrasion or chemical exposure, improving the overall integrity of your tubular system.
boronized premium tubing and pup joints
—Made in Tennessee, trusted worldwide-
Product Highlights:
Internally boronized premium tubing
Boronized pup joints for wear-critical areas
Resistant to abrasion, acid attack, and erosion
Longer service life in extreme oilfield conditions
Proven in oil, gas, geothermal, and mineral recovery applications
✅ Made in USA – Manufactured in Tennessee
🌍 Available worldwide through Bortec’s global distribution network
Abrasion Test Results (ASTM G65 – 6000 revs):
Material Mass Loss (g) Volume Loss (mm³) Mild Steel 40.2 315 J55 25.8 201 BOROCOAT® Premium 7.2 50
BOROCOAT ® Premium tubing
Available sizes: 2-3/8”, 2-7/8”, 3-1/2”
Length Range 2
100% Domestic Product “Made in USA” available
Material: J55, L80, 1%Cr
BOROCOAT ® Premium Pup Joints
Available length: 2ft, 4ft, 6ft, 8ft, 10ft
Material: J55, L80, 1%Cr
BOROCOAT ® Premium collars, internally and externally boronized
Available sizes: 2-3/8”, 2-7/8”, 3-1/2”
Material: J55, L80, 1%Cr
