Hard Chrome Plating explained – Process, Properties and Applications

In hard chrome plating, the workpiece is coated with a hard chrome layer. The goal is to provide an improved protection against wear and a corrosion resistant surface. In addition, after treatment the workpiece has a high hardness of 900 to 1200 HV and a temperature resistance of up to 400° C.

The main difference to bright chrome is the layer thickness. This is significantly thicker with hard chrome plating and is between 15 and 500 μm, whereby the final layer thickness depends on the expected stress on the workpiece. However, there is no chemical or physical difference between the chrome layers in the two processes.

The process is associated with health and environmental concerns.

Chrome plating process

Surface pre-treatment

The workpiece to be treated must have the smallest possible roughness depth of Rz 2 – 3 μm, as the hard chrome layer does not cover any scratches, pores or structural defects. For this reason, the workpiece is ground or belt polished in preparation. It should also be noted that the material must be metallically bright before treatment. This is the only way to ensure adequate protection.

Process steps

In hard chrome plating, the workpiece is electrolytically coated with the chrome layer in an electroplating bath. The process temperatures here are usually between 50 and 60° C. A rectifier is used to reduce the chromium ions to metallic chromium. This supplies the electrons needed for the process. In this way, chromium is only deposited at the points opposite an electrode (anode). As is usual in electric baths, edges build up due to the field line distribution at the points favored by the current. However, this can be reduced with the help of a special rack.

The required thickness of the chrome layer is decisive for the subsequent chemical and mechanical stress. The following layer thicknesses are applied:

  • A layer thickness of 5 to 15 μm is applied in case of light wear. In addition, such a layer thickness serves to reduce friction.
  • Hard chrome coatings of 15 to 30 μm protect against moderate wear.
  • For adhesive wear resistance, a layer of 30 to 60 μm is applied to the workpiece.
  • For heavy wear resistance, a chromium layer of 60 to 150 μm is used.
  • To protect against abrasion and erosion as well as heavy wear, layer thicknesses of 150 to 350 μm are used.
  • Chrome layers of over 250 μm are used for repair parts.

The properties of the hard chrome surface after treatment

The main focus of the procedure is to improve the wear resistance of the workpiece. In addition, the hard chrome layer gives the workpiece a hardness of 900 – 1200 HV without distortion. The hard chrome plating makes the surface water and dirt repellent, which further improves the corrosion resistance of the workpiece. Also, the machined workpieces have low adhesion and a minimal coefficient of friction.

In summary, the workpiece has the following advantages after treatment:

  • no material distortion, despite high hardness
  • high wear resistance and abrasion resistance
  • low coefficient of friction and low adhesion tendency
  • improved protection against chemical stress
  • extended service life
  • higher corrosion protection
  • improvement of tribological properties

Industrial Applications

Hard chromium plating is suitable for a wide range of applications and metals. These include stainless steel, aluminum, non-ferrous metals and their alloys. Due to its excellent chemical, technical and mechanical characteristics, the process is important for a wide range of industries:

  • Cylinders in the printing industry: To ensure the highest print quality, it is of great importance that the cylinders have a flawless surface. Dimensional accuracy in the micrometer scale also plays a crucial role. Furthermore, the cylinders must have strong corrosion protection, as the inks and cleaning agents used are often very aggressive. For these reasons, optimized hard chrome coatings are typically used here. Other possible applications for hard chrome coatings in the printing industry are duct rollers and metering rollers.
  • Screen baskets for waste material processing in the paper industry: The screen baskets used must have a high level of wear protection as well as good repairability. Hard chrome plating is the best choice here. Other possible applications of hard chrome plating in the paper industry are creeping cylinders, applicator and ink metering rollers.
  • Pistons in mechanical engineering: Hard chrome plating is used for piston rings and piston ring grooves, as high wear protection is required here. Hard chrome plating is also used in mechanical engineering for various tools, shafts and measuring rollers.

The process is also used in the foil, automotive and food industries.

CORROSION AND WEAR PROTECTION WITH BORTEC SOLUTIONS

BorTec’s various solutions also offer you excellent corrosion and wear protection. With the help of our patented BORINOX® PROCESS FOR HARDENING STAINLESS STEEL, you not only increase the hardness of your workpieces, but also protect them from distortion and cold welding.

BOROCOAT® is a thermochemical diffusion process that allows you to significantly increase the wear resistance of your material by adding a boride layer.

The NICKELCOAT® PROCESS FOR NICKEL plating offers you another possibility to protect your workpieces against wear. For expert advice, contact us today.